• Indoor-Use PTZ Camera
• x220 Zoom (x22 Optical, x10 Digital)
• Day & Night
• 127 Presets
• Pattern Function

Hi-Res Picture  |  Printer Friendly Page

The PT 5000 is an industrial quality PTZ camera is perfect for high security loss prevention operations. The advanced Super HAD chipset produces beautiful video on your screen at a high resolution of 480 lines. Pelco control protocols are fully integrated which means it is completely compatible with any DVR systems that support Pelco D protocol. Using with PTC 3000 joystick controller, it can be controlled independently from the DVR. Also supports 64 presets so you can move to a spot quickly with only a push of button from the joystick controller. The mount for PT 5000 is available with a choice of either ceiling or wall. The camera operates on AC 24V.

FEATURES

Camera Specifications

• CCD Sensor : 1/4" Super HAD CCD
• Zoom Magnification : x22 Optical Zoom, x10 Digital Zoom(combine x220 Zoom)
• Day & Night Function

Powerful Pan/Tilt Functions

• Maximum 240°/sec high speed Pan/Tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
• For jog operation using a controller, since ultra slow speed 0.1°/sec can be reached, it is very easy to locate camera to desired target view.

Preset, Swing and Group Functions

• Max. 64 sets of position and zoom magnification are designated and stored as Preset. For each Preset, additional information such as Dwell time(pause time in Group action when camera reaches to a certain Preset position), Alarm action and area Label can be assigned independently to meet to your requirements.
• 8 of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
• 8 set of Group action can be stored. This enables to move camera repetitively with combination of Preset or Swing. A Group is composed of max. 20 entities of Preset or Swings.

PTZ Control

• With Rs-485 communication, max. 256 of cameras can be controlled at the same time.
• Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.

OSD(On Screen Display) Menu

• OSD menu is provided to display the status of camera and to configure the functions interactively.
• The information such as Camera ID, Pan/Tilt angle, Alarm I/O, Preset info can be displayed on the screen.

Alarm I/O Functions

• 2 alarm sensor Inputs and 2 alarm Output replays are available
• To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler and the relay is used for alarm output.
• The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications. Meanwhile, the maximum load of relay contact is AC 250V, 5A or DC 28V, 5A
• If an external sensor is activated, camera can be set to move to the corresponding Preset position. Meanwhile, the output relay can be matched to some specific Preset positions to do counteractions such as turning on the light or sound the alarm.

SPECIFICATIONS

		PT 5000
Camera	Sensor	1/4" Super HAD CCD
	Max. Pixels	811(H) x 508(V) 410K (NTSC) 795(H) x 596(V) 470K (PAL)
	Effective Pixels	768(H) x 494(V) 380K (NTSC) 752(H) x 582(V) 440K (PAL)
	Horizontal Resolution	480 (H) TV Line (Day) / 520 (H) TV Line (Night)
	S/N Ratio	More than 48 dB (AGC off)
	Zoom	x22 Optical Zoom, x10 Digital Zoom
	Focal Length	f=3.9 ~ 85.8mm
	Min. Illumination	1.0 Lux (Day) (30 IRE) / 0.001 Lux (Night)
	Day & Night	Auto / Day / Night
	Focus	Auto / Manual
	Iris	Auto
	White Balance	Auto / Manual / Indoor / Outdoor
	Backlight	On / Off
Pan/Tilt	Range	Pan : 360°(Endless) / Tilt : 90°
	Pan / Tilt Speed	Preset : 240°/sec Manual : 0.1° ~ 120°/sec (Proportional to zoom) Swing : ~ 60°/sec
	Preset	64 Preset (with editable Labels)
	Swing	8 Swing
	Group	8 Group (20 Action Entities Per Group)
	Other Function	Auto Parking, Power Up Action etc
General	Communication	RS-485 (Max. 255 unit)
	Protocol	Pelco-D, Pelco-P Selectable
	Alarm I/O	Points : 2 Inputs / 2 Outputs Input Voltage : DC 5V ~ 12V Max.Load : DC 28V, 5A or AC 250V, 5A
	OSD	Menu / PTZ info
	Rated Power	AC 24V / 1A
	Dimension	Dome : 5.1"(Ø) Housing : 5.3"(Ø) x 8.1"(H)
	Weight	Approx 3.3 lbs
	Operating Temp	0°C ~ 40°C (32°F~104°F)