• Outdoor Weather-Resistant
• x220 Zoom (x22 Optical, x10 Digital)
• Day & Night
• Built-in Heater & Blower / Sun Shield
• 127 Presets
• Pattern Function

Hi-Res Picture  |  Printer Friendly Page

The PT 4500 is an industrial quality PTZ camera. It is perfect for high security loss prevention operations. The advanced Day & Night Sony Super HAD chipset produces a beautiful video on your screen at a high resolution of 480 lines. It also features a Day and Night function which shows a great detailed video even at low light environment such as, parking lots. Pelco control protocols are fully integrated which means, it is completely compatible with any DVR systems that supports Pelco D protocol. Using the PTC TP 3000 joystick controller, it can be controlled independently from the DVR. PT 4500 is one of the perfect outdoor PTZ solution because, of the following reasons. Sturdy weatherproof metal housing protects the camera from harsh weather conditions. Inside of the case there is a heater and blower to prevent fog up in the front protective cover. Also, it supports 127 presets so you can move to a spot quickly with only a push of button from the joystick controller. The mount for PT 4500 is available with a choice of either ceiling or wall mount. The camera operates on AC 24V.

FEATURES

Camera Specifications

• 1/4” SONY Super HAD
• Zoom Magnification: x22 Optical Zoom, x10 Digital Zoom (Max x220 Zoom)
• Day & Night Function
• Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus.
• Independent & Simultaneous Camera Characteristic Setup in Preset operation

Advance Pan/Tilt Functions

• Max. 360°/sec high speed Pan/Tilt Motion
• Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result, time to target view is reduced dramatically and the video on the monitor is very natural to watch.
• The ultra slow speed of 0.05°/sec. can be reached by using the jogging operation. It is very easy to locate the camera to desired target.

Preset, Pattern, Swing, Group, Privacy Mask and More

• MAX. 127 Presets are assignable and characteristics of each preset can be set up independently, such as White Balance, Auto Exposure, Label, Digital Outputs and so on.
• Max. 8 set of Swing action can be stored. This enables to move camera repetitively between two preset positions with designated speed.
• Max. 4 of Patterns can be recorded and played back. This enables to move camera to follow any trajectory operated by joystick as closely as possible.
• Max. 8 set of Group action can be stored. This enables to move camera repetitively with combination of Preset or Pattern or Swing. A Group is composed of maximum 20 entities of Preset / Pattern / Swings.
• Privacy Masks are assignable, not to intrude on other’s privacy. (8 Privacy Zones) The availability for Privacy Mask function should be different by models.

PTZ(Pan/Tilt/Zoom) Control

With RS-485 communication, maximum 255 of cameras can be controlled at the same time. Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.

OSD (On Screen Display) Menu

OSD menu is provided to display the status of camera and to configure the functions interactively. The information such as Camera ID, Pan/Tilt Angle, Alarm I/O and Preset can be displayed on screen.

Alarm I/O Functions

• 4 alarm sensor Inputs and 2 alarm Output relays are available.
• To reject external electric noise and shock perfectly, alarm sensor Input is decoupled with photo coupler and the relay is used for alarm output.
• The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various applications. Meanwhile, the maximum load of relay contact is AC 250V, 3A or DC 28V, 3A.
• If an external sensor is activated, camera can be set to move to the corresponding Preset position. Meanwhile, the output relay can be matched to some specific Preset positions to do counteractions such as turning on the light or sound the alarm.
• Reserved Presets for Special Purpose
• Most camera characteristics can be set up easily and directly with reserved preset, not entering into OSD menu. For more information, refer to “Reserved Preset” in this manual.

SPECIFICATIONS

		PT 4500
Camera	CCD	1/4” Sony Super HAD CCD
	Max. Pixels	811(H) x 508(V) 410K
	Effective Pixels	768(H) x 494(V) 380K
	Horizontal Res.	480 TV Line
	S/N Ratio	48dB
	Zoom	x22 Optical Zoom, x10 Digital Zoom
	Focal Length	F1.6 ~ 3.2, f=3.3(Wide) ~ 99(Tele)mm
	Min. Illumination	1.0 Lux (Day) / 0.001 Lux (Night)
	Day & Night	Auto / Day / Night (IR Cut Filter)
	Focus	Auto / Manual / SemiAuto
	AE Mode	Auto / Iris / Shutter / Manual
	White Balance	Auto / Manual (Red, Blue, Gain Adjusttable)
	BLC	On / Off
	Flickerless	On / Off
	Brightness	Adjustable
Pan / Tilt	Range	Pan : 360°(Endless) / Tilt : 90°
	Pan / Tilt Speed	Preset : 360°/sec Manual : 0.05° ~ 360°/sec (Proportional to zoom) Swing : 1° ~ 180°/sec
	Preset	127 Preset (Label, Camera Image Setting)
	Pattern	4 Pattern, 1200 commands(about 5 minutes) / Pattern
	Swing	8 Swing
	Group	8 Group (20 action entities per Group)
	Other Functions	Auto Flip, Auto Parking, Power Up Action etc.
Gerneral	Communication	RS-485
	Protocol	Pelco-D, Pelco-P selectable
	Alarm I/O	4 Input / 2 Output
	OSD	Menu / PTZ information etc.
	Power	AC Type : AC 24V / 2A
	Dimension	Dome : 6.0”(Ø) Housing : 8.5”(Ø) x 10.2”(H)
	Weight	Approx 5.5 lbs
	Operating Temp.	-30°C ~ 50°C (-22°F~122°F)